Figure 34: Function block view - Message Generator
Table 55: Assignment of messages to the inputs in use
Inputs
Logic active
Effect
1 and 2
High
The rising signal edge triggers the message.
3 and 4
Low
The falling signal edge triggers the message.
Figure 35: Configuration view - Message Generator
7.5.5
Stop/start/reset page
Figure 36: Stop/start/reset page view
This page is protected with a password and cannot be configured. The inputs of the
reset/restart function for SS1 and SS2 are linked to the “Interface” page via jump
addresses, i.e., the physical inputs are assigned on the “Interface” page. The outputs
are also linked to other parts of the safety application software via jump addresses and
internal signals.
CONFIGURATION
7
8020941/12O9/2019-08-05 | SICK
O P E R A T I N G I N S T R U C T I O N S | Safe Linear Positioning
61
Subject to change without notice
