manualshive.com logo in svg

SICK FX3-MOC1, Руководство по эксплуатации

Поделиться
Скачать
SICK FX3-MOC1 Скачать руководство пользователя страница 46

Input name

Function

Inhibit Motion bits reaction The signal comes from component 

SAPP-FB Safe Position

. The signal

prevents unintended switching off during the self-test of the safety
system.

1

The 

Safe Stop

 function block triggers a fault while the override function or 

Sensor2 test

 is active.

As this is a permitted status that is monitored, the stop request is not forwarded to the drive. In this case,
the 

Safe Stop

 function block detects a ramp fault. This is automatically reset by the software following an

override function or 

Sensor2 test

 once the function has been processed successfully.

Table 36: Outputs of the function block

Output name

Function

Enable torque

This safety signal deactivates the drive’s torque. The signal is
transmitted to the CPU logic and has an impact on the safe out‐
puts (dual-channel output signal switching device).

Enable brake

This safety signal switches off the energy supply for the optional
brake. The signal is transmitted to the CPU logic and has an
impact on the safe outputs (dual-channel output signal switching
device).

Stop request

This signal triggers the stop ramp of the drive. The signal is trans‐
mitted to the CPU logic and is forwarded either to the process con‐
troller or to the drive directly.

7.3.7.1

Safe Stop - Stop Ramps function block

1.

Move the mouse cursor to the 

Safe Stop

 function block.

2.

Double-click on the function block.

✓

The view opens. The window containing the settings for the function block will
appear.

The 

Stop Ramps

 function block monitors the actual reduction in speed until the drive

comes to a standstill. The ramp settings will depend on the application and the compo‐
nents in use (e.g., the drive).

Refer to the Flexi Soft Designer operating instructions for further details on how to con‐
figure safe ramp monitoring. The screenshot below shows the standard configuration,
with ramp monitoring deactivated.

7 

CONFIGURATION

46

O P E R A T I N G   I N S T R U C T I O N S | Safe Linear Positioning

8020941/12O9/2019-08-05 | SICK

Subject to change without notice

Содержание FX3-MOC1

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды