SICK FLOWSIC200, Руководство по эксплуатации

Страница: 22 / 122

22 FLOWSIC200 · Operating Instructions · 8013271/1CJ9/V2-0/2022-01 · © SICK Engineering GmbH
Product description
In the graphic display, two factory-preselected main measured values of a
connected sensor pair are shown in a bar graph. Alternatively, up to 8 single
measured values of a sender/receiver unit can be displayed (toggle with “Meas”
button).
Fig. 9 LC display with graphic (left) and text (right) display
– Control buttons
2 I/O module
For plugging onto module carrier (MCU in wall-mounted housing) or in slide-in module
(MCU in 19" housing), optionally as:
– Analog output module with 2 outputs 0/4 ... 22 mA to output further measured
variables (load 500

)
– Analog input module with 2 inputs 0/4 ... 22 mA to read in values from external
sensors
– Digital output module with 2 outputs (NC contact, contact load 48 V AC/DC, 5 A)
– Digital output module with 4 outputs (NO contact, contact load 48 V AC/DC, 0,5 A)
3 Interface module
Module to pass on measured values, system status and service information to higher
level control systems, optionally for Profibus DP V0, Ethernet or MODBUS, to plug onto a
hat rail (MCU in a wall housing) or slot (MCU in 19" housing). The module is connected
to the connection board with an associated cable.
Button Function
Meas
– Toggles between text and graphic display
– Displays the contrast settings (after 2.5 s)
Arrows Selects next/previous measured value screen
Status Displays alarm or error messages
Menu Displays main menu and selection of submenus

One module carrier is required per module (to plug in on the hat rail).
One module carrier has to be connected to the processor board with a
special cable, other module carriers can be docked to it.

A maximum of 8 I/O modules can be plugged in, of which a maximum of
4 modules of the same type.
Profibus DP-V0 for transfer via RS485 according to DIN 19245 Part 3 as
well as IEC 61158.