Operating Instructions
Chapter
3
DME4000
8014584/ZN33/2017-07
© SICK AG • Germany • Subject to change without notice
77
Menu Structure
DeviceNet
Baud rate
125 (default)
Setting the baud rate (125, 250, 500 kBaud)
Bus Address
Addr. 06 (default)
Setting the DeviceNet address (range 0 ... 63)
CANopen
Baud rate
125 kBd (default)
Setting the baud rate (125, 250, 500 kBaud, 1 MBaud)
Node-ID
ID: 006 (default)
Setting the Node-ID (range 001 ... 127)
Serial
Baud rate
19.2 (default)
Baud rate for RS 422 parameter interface (max. 115.2 kBd)
Baud rate for SSI monitor interface (max. 38.44 kBd)
Data
7,e,1
7 data bits, even parity, 1 stop bit
8,e,1
8 data bits, even parity, 1 stop bit
8,n,1 (default)
8 data bits, 1 stop bit
For a detailed description, see Chapter 8.2.2 “RS 422”.
MF1
Parameterizable input or output.
Act.State
Operation
Low Active
High Active (default)
Aktiv 1
LOW (or not switched*))
HIGH
Aktiv 0
HIGH
LOW (or not switched*))
*) When using as input, see Chapter 9 “Appendix”.
Function
Distance
(default) see 3.3.3
Service
see 3.3.4
Preset
Overwriting of the offset value
Offset = Preset value – current measured value
For a function description, see “Explanation of Terms – Preset”.
Sleep Mode
Laser off, measured value = 0, acknowledgment via Ready status
For a function description, see “Explanation of Terms – Sleep Mode”.
Monitor
(Only SSI variant): Is displayed when the monitor interface is set to ON under 3.1.4.
