5
Mounting
5.1
Safety
Important information
DANGER
Hazard due to lack of effectiveness of the protective device
If unsuitable brackets are used or if subjected to excessive vibrations, the device may
become detached or damaged.
Persons and parts of the body to be protected may not be recognized in case of
non-observance.
b
Only use SICK-approved brackets for mounting.
b
Take appropriate measures for vibration damping if vibration and shock specifica‐
tions exceed the values and test conditions specified in the data sheet.
NOTE
Mount the device in the following order.
Prerequisites
The safety light curtain has been designed correctly.
Further topics
•
•
5.2
Unpacking
Approach
1.
Check the components for completeness and the integrity of all parts.
2.
In the event of complaints, contact the responsible SICK subsidiary.
Further topics
•
"Ordering information", page 150
5.3
Mounting the system plug
Overview
You must mount the system plug on the safety light curtain prior to starting mounting
and electrical installation work. Please note that depending on the application, the
system plug used at the sender may be different to that at the receiver.
Important information
DANGER
Hazard due to lack of effectiveness of the protective device
Malfunctions can occur if the safety light curtain is connected other than with one of
the system plugs provided.
b
Use the system plugs provided.
5
MOUNTING
76
O P E R A T I N G I N S T R U C T I O N S | deTec4
8021645/1EB0/2022-04-28 | SICK
Subject to change without notice