SICK CLV 490 Series Скачать руководство пользователя страница 220

Страница: 220 / 266

Chapter

Operating Instructions

CLV 490 Bar Code Scanner

10-54

8 009 993/O824/20-12-2004

Appendix

Example:

The command "3?LT" causes the CLV to display the parameter values of the reading

trigger in coded form in output window

To return to Reading mode, click on the R

EADING

MODE

option field.

The "Device Ready" LED lights up.

Note

The parameter values directly changed with command strings in the CLV are registered and

shown only after the parameter set is uploaded from the CLV.

A list of command strings, is available on request.

Outputting command strings for all the parameter settings

You can output a list of all the parameter settings configured with CLV-Setup in ASCII format.

To do so, proceed as follows:

In the menu bar, choose E

XPORT

ARAMETERS

under CLV 490.

Starting from the default settings, CLV-Setup collects all the command strings required

to parameterize the default configuration and customized settings.

The S

ELECT

FILE

NAME

FOR

PARAMETER

EXPORT

dialog box is displayed.

Enter a file name and click the S

AVE

button.

CLV-Setup saves the data as a text file in the directory shown.

You can open this text file using any Windows text editor.

If the commands are sent from the host/PLC to the CLV for configuration, note that "3 EEW"

has to be sent as the last command to ensure that they are permanently transferred to the

CLV (EEPROM).

Содержание CLV 490 Series








































































































































































































































































Результаты поиска

Содержание CLV 490 Series

Отзывы:

Бренды по названию

Популярные бренды

SICK CLV 490 Series, Руководство по эксплуатации

Результаты поиска

Содержание CLV 490 Series

Отзывы:

Бренды по названию

Популярные бренды