SICK CLV 490 Series Скачать руководство пользователя страница 203

Страница: 203 / 266

Operating Instructions

Chapter

CLV 490 Bar Code Scanner

8 009 993/O824/20-12-2004

10-37

Appendix

Start with internal parameters

When it starts, the CLV loads the internal parameter set to its RAM.

The "Device Ready" LED lights up constantly.

Since the data is stored permanently, it is not lost when the device is switched off.

Start with external parameters (default setting)

When it starts, the CLV loads the external parameter set to its RAM.

The "Device Ready" LED blinks for approx. 10 s and then lights up constantly.

The data in the CLV is lost when the device is switched off.

Start with copy internal -> external

When it starts, the CLV loads the internal parameter set to its RAM. It then copies the para-

meter set to the external memory in the connector cover and resets the start option to

"Start with External Parameters".

The two "Device Ready" and "Read Result" LEDs blink alternately for approx. 10 s. The

"Device Ready" LED then lights up constantly.

The data is not lost when the device is switched off since it is stored permanently in the CLV

and is identical to the internal parameter set.

10.3.4

Switching on the device for the first time

Since the external parameter memory in the connector cover is empty (e. g. on delivery) af-

ter the CLV has started, the CLV copies its current parameter set to the external parameter

memory if no CMC 400 parameter memory module is available in the CDB 420 or CDM 490

Connection Module. Then the "Device Ready“ LED lights up. The CLV is ready for operation.

If an external parameter memory containing a corresponding parameter set is connected to

the CLV, the "Device Ready" LED blinks for 10 s when the device starts up correctly and

then lights up constantly

10.3.5

Adjusting the parameter set in the external parameter memory (connector

cover) after it has been downloaded to the CLV

If the CLV is started with the S

TART

WITH

XTERNAL

ARAMETERS

option with an external para-

meter memory in the connector cover and if the parameter set is downloaded from CLV-

Setup to the CLV with the

permanent

storage option, CLV-Setup asks you whether the new

parameter set is also to be copied to the external parameter memory (

Fig. 10-34,

Page 10-38

This function prevents the CLV from reloading the old parameter set the next

time it starts.

Содержание CLV 490 Series








































































































































































































































































Результаты поиска

Содержание CLV 490 Series

Отзывы:

Бренды по названию

Популярные бренды

SICK CLV 490 Series, Руководство по эксплуатации

Результаты поиска

Содержание CLV 490 Series

Отзывы:

Бренды по названию

Популярные бренды