COMMISSIONING
6
35
8023732/2018-09-10|SICK
Subject to change without notice
O R I G I N A L O P E R A T I N G I N S T R U C T I O N S | AOS301-WWD
6
Commissioning
Commissioning may only be performed by qualified persons.
•
Qualified persons have the specialist training, skills, and experience, as well as
knowledge of the relevant regulations and standards, to be able to perform work
assigned to them and to identify and avoid any potential dangers independently.
•
Electricians have the professional training, skills and experience, and knowledge of
the relevant standards and provisions to work on electrical systems and to detect
and avoid any potential dangers independently.
6.1
Starting the system
▸
Connect the voltage supply.
All hardware and software components of the system are started up and checked for
operational readiness.
•
The TDC-E is delivered with the pre-installed applications. When a cold start is
performed, a device that is still in this original state will be ready for operation after
approx. 120 s.
•
When a warm start is performed via TDC-E Device Manager, all applications are shut
down first. The operating system and containers are then restarted.
A warm start takes approx. 180 s.
▸
Check the operational status of the components by looking at the status indicators.
