SICK A3M60 Advanced, Руководство по эксплуатации

Страница: 16 / 34

Commissioning
Chapter 4 Operating Instructions
16
© SICK AG • Germany • All rights reserved
8014012/1EF3/2021-12-08
Subject to change without notice
4.2 Electrical installation
Switch the power supply off!
A3M60 Basic
WARNING
The machine/system could unintentionally start up while you are connecting the devices.
► Ensure that the entire machine/system is disconnected during the electrical
installation.
For the electrical installation you will need connection plugs and sockets (see section 7.2
“A ccessories ” on page 28)
Fig. 3: Connections of
the A3M60 Basic
Tab. 11: Pin assignment for
the connection of the voltage
supply
Tab. 12: Pin assignment for
the connection PROFIBUS IN
Tab. 13: Pin assignment
for the connection
PROFIBUS OUT
Notes
4.2.1 Connections of the A3M60 Basic
Voltage supply plug PROFIBUS IN M12 × 5, plug PROFIBUS OUT
M12 × 5, socket
Pin Signal Core color
3)
Function
1 V
S
Brown Supply voltage 10 V … 32 V DC
2 – White Do not use
3 GND Blue 0 V DC (ground)
4 – Black Do not use
5 – Grey Not assigned
Pin Signal Core color
3)
Function
1 – – Not assigned
2 A Green A<wire PROFIBUS DP
3 – – Not assigned
4 B Red B<wire PROFIBUS DP
5 Screen – Housing
Pin Signal Core color
3)
Function
1 – – Not assigned
2 A Green A<wire PROFIBUS DP
3 0 V DC – Ground
4 B Red B<wire PROFIBUS DP
5 Screen – Housing
► Connect the screen to the encoder’s housing!
► Pay attention to the maximum cable lengths (see Tab. 3 on page 10).
3)
On the usage of pre-assembled cables.