SICE S 63 E, Инструкция по эксплуатации

Страница: 95 / 356

Operator's Manual
S 63 E - S 63 E C
95
2. BALANCING PROGRAMME SELECTION
Before starting a balancing operation, the following steps must be followed:
- fit the wheel on the hub using the most suitable flange;
- lock the wheel so that no movement is possible during the wheel spin and braking phases;
- remove any counterweight, pebble, dirt or other foreign body;
- set the wheel's geometric data correctly.
At start-up, by default, the wheel balancer executes the dynamic programme (dyn) which
uses clip weights on both sides.
The various balancing programmes can be recalled by simply selecting the keys
that represent the type of weight according to the rim and professional experi-
ence, both for the inner side as well as for the outer side.
The following balancing programmes are available:
Vehicle
type
Balancing
programme
Inner weight applica-
tion type and mode
External weight appli-
cation type and mode
dyn
clip weight to apply
manually at the 12
o'clock position
clip weight to apply
manually at the 12
o'clock position
ALU
1P
Adhesive weight to ap-
ply manually at the
12* o'clock position or
using weight holder if
present
adhesive weight to ap-
ply manually at the
12* o'clock position or
using weight holder if
present
ALU
2P
clip weight to apply
manually at the 12
o'clock position.
adhesive weight to ap-
ply manually at the
12* o'clock position or
using weight holder if
present.
ALU 3
adhesive weight to ap-
ply manually at the 12*
o'clock position.
adhesive weight to ap-
ply manually at the
12* o'clock position
ALU 4
clip weight to apply
manually at the 12
o'clock position
adhesive weight to ap-
ply manually at the 12*
o'clock position.
ALU 5
adhesive weight to ap-
ply manually at the 12*
o'clock position.
clip weight to apply
manually at the 12
o'clock position