SICE PT 230 E, Инструкция по эксплуатации

Страница: 30 / 92

30 PT 230 E - Operator’s spare parts
- Press the lift lever, release the wheel from the
roller and bead depressor.
aPPRovED M/D PRoCEDURE foR
UHP anD RUn flaT TYREs
for the detailed M/D procedure for UHP and RUn
flaT tyres, please refer to the instruction manual
wrote by WDK (German association of the Tyre
Industry)
MaInTEnanCE
WaRnInG
The producer declines all liability for claims
deriving from the use of non-original spares or
accessories.
WaRnInG
before making any adjustments or carrying out
maintenance, disconnect the electrical supply
from the machine and make sure that all moving
parts are suitable immobilised.
WaRnInG
Do not remove or modify any parts of this machine
except in the case of service interventions.
DanGER
before carrying out any maintenance operation or
topping up with lubricant, disconnect the machine
from the compressed air supply line.
aTTEnTIon
Keep the work area clean.
Do not clean the machine with compressed air
or jets of water.
When cleaning the area avoid raising dust as far
as possible.