SICE PT 230 E, Инструкция по эксплуатации

Страница: 21 / 92

PT 230 E - Operator’s spare parts 21
UK
safETY REGUlaTIons
The equipment is intended for professional use only.
WaRnInG
only one operator may work on the equipment
at a time.
WaRnInG
failure to observe these instructions and the
relative danger warnings can cause serious injury
to the operator and others. Do not power up the
machine before you have read and understood
all the danger/warning/attention notices in this
manual.
This machine must be used only by qualified and
authorised personnel. A qualified operator is con-
strued as a person who has read and understood the
manufacturer’s instructions, is suitably trained, and
is conversant with safety and adjustment procedures
to be adhered to during operations. Operators are
expressly forbidden from using the machine under
the influence of alcohol or drugs capable of affecting
physical and mental capacity.
The following conditions are essential:
- The operator must be able to read and understand
all the information in this manual.
- Make sure you have a thorough knowledge of the
capabilities and characteristics of this machine.
- Keep unauthorised persons well clear of the area
of operations.
- Make sure that the machine has been installed
in compliance with established legislation and
standards.
- Make sure that all machine operators are suitable
trained, that they are capable of using the machine
correctly and that they are adequately supervised
during their work.
- Never leave nuts, bolts, tools or other equipment
on the machine to avoid the risk that they could
become entrapped between moving parts during
work.
- Do not touch power lines or the inside of electric
motors or other electrical equipment until the
power has been disconnected and locked out.
- Read this manual carefully and learn how to use
the machine correctly and safely.
- Always keep this user manual in a place where it
can be readily consulted when working with the
machine and consult it whenever you are in need
of confirmation or explanations.
TRansPoRT, sToRaGE anD
HanDlInG
Machine transport conditions and
technical data
The upright kit and the PT 230 Emust be transported
in their original packing and must be kept in the
same position as indicated on the packing.
PT 230 E
- maximum tyre diameter: ........................ 1080 mm
- rim diameter: ...........................min 10” - max 26”
- rim width: ................................ min 4” - max 14”
- bead breaker cylinder force: ......... 9300 N a 10 bar
- operating pressure: ................................... 10 bar
• Weight
- Column .................................................... 18 kg
- Power unit .............................................. 48 kg
- Mobile arm .............................................. 19 kg
- Universal rim pressing cone ........................ 1 kg
ambient conditions for storage and
transport
Temperature range from -25° ÷ +55°C.
WaRnInG
Do not stack other goods on top of the packing
or damage may result.
aTTEnTIon
Keep the packing material intact for possible
future transport of the machine.