- 64 -
PM Control by APM
If this item set to
No
, system BIOS will be ignored and APM calls the
power to manage the system.
If this item setup to
Yes
, system BIOS will wait for APM's prompt before
it enter any PM mode e.g.
DOZE, STANDBY
or
SUSPEND
.
Ø
The choice: Yes, No.
Video Off Option
This item define when to activate the video off feature for monitor
power management.
Ø
The choice: Suspend, Doze, N/A.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC + Blank
This selection will cause the system to turn off
the vertical and horizontal synchronization ports and write blanks
to the video buffer.
Blank Screen
This option only writes blanks to the video
buffer
DPMS
Initial display power management signaling.
Ø
The choice: V/H SYNC + Blank, Blank Scrren, DPMS Support.
Modem Use IRQ
This item determines the IRQ in which the MODEM can use.
Ø
The choice: 3, 4, 5, 7, 9, 10, 11, N/A
Soft-Off by PWRBTN
The setting of
Instant-Off
allows the ATX switch to function as a normal
system power off button when pressed for less than 4 seconds.The
setting fo
Delay 4 Sec.
Allows the button to have a dual function where
to press the button for less than 4 seconds will place the system in
suspend mode, and pressing the button for more than 4 seconds will
shut place the system off.
Ø
The choice: Instant-Off, Delay 4 Sec.
