- 28 -
Clear CMOS (JP2)
JP2 is used to clear CMOS data. Clearing CMOS will result in permanently
erasing the previous system configuration settings and restoring the original
(factory-set) system settings.
Pin 1-2 (Default)
Pin 2-3 (Clear CMOS)
Step 1.
Turn off the system power (PC-> Off)
Step 2.
Remove jumper cap from JP2 pins 1-2
Step 3.
Place the jumper cap on JP2 pin 2-3
for a few seconds
Step 4.
Return the jumper cap to pin 1-2
Step 5.
Turn on the system power (PC-> On)
A3
JP2
1
