- 59 -
Primary Master / Slave PIO
In this items, there are five modes defined in manual mode and one
automatic mode. There are
0, 1, 2, 3, 4,
and
AUTO
is the default
settings for on board Primary Master / Slave PIO timing.
Ø
The choice: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4.
Secondary Master / Slave PIO
In this items, there are five modes defined in manual mode and one
automatic mode. There are
0, 1, 2, 3, 4,
and
AUTO
is the default
settings for on board Secondary Master / Slave PIO timing.
Ø
The choice: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4.
Primary Master / Slave UDMA
On this mainboard, AV18 PCIset improves IDE transfer rate using Bus
Master UltraDMA 33/66 IDE which can handle data transfer up to 33/
66MB/sec.
Auto
is the default settings for on board Primary Master /
Slave
UltraDMA 33/66
.
Note : Your hard drive must also support UDMA for this feature to
work.
Ø
The choice: Auto, Disabled.
Secondary Master / Slave UDMA
On this mainboard, AV18 PCIset improves IDE transfer rate using Bus
Master UltraDMA 33/66 IDE which can handle data transfer up to 33/
66MB/sec.
Auto
is the default settings for on board Secondary Master /
Slave
UltraDMA 33/66
.
Note : Your hard drive must also support UDMA for this feature to
work.
Ø
The choice: Auto, Disabled.
Init Display First
This item is used to determine initial device when system power on.
Ø
The choice: AGP, PCI Slot.
IDE HDD Block Mode
This item is used to set IDE HDD Block Mode. If your IDE Hard Disk
supports block mode, then you can enabled this function to speed up
the HDD access time. If not, please disabled this function to avoid HDD
access error.
Ø
The choice: Enabled, Disabled.
