9/20/17, 11)49 AM
Shure Publications | User Guides | ULXD6 ULXD8
Page 9 of 31
http://pubs.shure.com/guide/ULXD6-ULXD8/en-US
Boundary and gooseneck base transmitters can be
powered by Shure SB900A batteries or two AA batteries
(included).
The receiver front panel displays battery charge level in
hours/minutes for Shure batteries and in bars for AA
batteries. For accurate monitoring, set battery type in the
IR
Presets menu using the receiver front panel or Wireless
Workbench and perform an IR sync.
Menu path: IR
PRESETS > GOOSENECK
/
BOUNDARY >
BATTERY
Installation
1. Open the battery door.
2. Insert one Shure battery or two AA batteries. Align
+/- terminals on batteries as shown. For AA batteries,
rotate the rubber piece to hold batteries in place.
3. Close the battery door until it latches.
Use the small screw to the right of the batteries to secure
the battery door against tampering, if necessary.
1. Open the battery door.
2. Use a screwdriver to remove the screw to the right of