manualshive.com logo in svg

Shure ULXD6, Руководство пользователя

Поделиться
Скачать
Shure ULXD6 Скачать руководство пользователя страница 29

9/20/17, 11)49 AM

Shure Publications | User Guides | ULXD6 ULXD8

Page 29 of 31

http://pubs.shure.com/guide/ULXD6-ULXD8/en-US

est susceptible d'en compromettre le fonctionnement.

Note: EMC conformance testing is based on the use of supplied
and recommended cable types. The use of other cable types may
degrade EMC performance.

The CE Declaration of Conformity can be obtained from:
www.shure.com/europe/compliance

Authorized European representative:

Shure Europe GmbH

Headquarters Europe, Middle East & Africa

Department: EMEA Approval

Jakob-Dieffenbacher-Str. 12

75031 Eppingen, Germany

Phone: +49-7262-92 49 0

Fax: +49-7262-92 49 11 4

Email: [email protected]

Information to the user

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following

Содержание ULXD6
































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды