9/20/17, 11)49 AM
Shure Publications | User Guides | ULXD6 ULXD8
Page 14 of 31
http://pubs.shure.com/guide/ULXD6-ULXD8/en-US
Initial state from charger
Battery type
Device name
Channel name
Frequency
Normal or High-Density mode
Boundary and gooseneck offset
There are three ways to change transmitter settings:
Wireless Workbench and Networked
Charging Station (recommended)
Required equipment: Networked charging station,
computer with Wireless Workbench installed, and
transmitter
1. Place transmitters on charger. Check that charger is
connected to network and to Wireless Workbench.
2. Open the Item
Properties for the networked charger
in Wireless Workbench.
3. Select one or multiple transmitters.
4. Make changes to transmitter settings and click Apply.
Transmitters are now ready to use.
