SHOWTEC Net-8/5, Руководство пользователя

Страница: 8 / 24

7
Order code: 50810
Net-8/5
Backside
Fig. 02
06)
Power switch ON/OFF
07) Pro power connector Blue IN
08) Fuse T1AL/250 V
09) Ground/earth connection
10) 8 x 5-pin XLR DMX OUT with LED indicators
11) Ethernet RJ45 connecter 1 with Activity and Speed LED indicators
12) Ethernet RJ45 connecter 2 with Activity and Speed LED indicators
Installation
Remove all packing materials from the Net-8/5. Check that all foam and plastic padding is removed.
Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.