background image

 

  

 

 

   

 

Order code: 50810 

Net-8/5 

Operating Determinations 

 

This device is not designed for permanent operation. Consistent operation breaks will ensure that the 
device will serve you for a long time without defects. 

 

The maximum ambient temperature ta = 40 °C must never be exceeded. 

 

In order to eliminate wear and improve the device’s lifespan, during periods of non-use, completely 
disconnect from power source via breaker or by unplugging. 

 

The relative humidity must not exceed 50 % with an ambient temperature of 40° C. 

 

If this device is operated in any other way, than the one described in this manual, the product may 
suffer damages and the warranty becomes void. 

 

Any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc. 

 

You endanger your own safety and the safety of others! 

 

Improper installation can cause serious damage to people and property! 

 

Connection with the mains 

Connect the device to the mains with the power-plug. 
Always pay attention, that the right color cable is connected to the right place. 
 

International 

EU Cable 

UK Cable 

US Cable 

Pin 

BROWN 

RED 

YELLOW/COPPER 

PHASE 

BLUE 

BLACK 

SILVER 

NULL 

 

YELLOW/GREEN 

GREEN 

GREEN 

EARTH 

 

Make sure that the device is always properly connected to the earth! 

 

Improper installation can cause serious injuries and/or damage of property! 

 

 

Содержание Net-8/5

























Отзывы: