14
Order code: 50810
Net-8/5
04)
Press the RIGHT button to select a port. The display shows:
05)
Press the UP/DOWN buttons to scroll through the following options:
●
DISP TYPE (Display type)
●
DEC: Decimal display (0–255)
●
HEX: Hexadecimal display (00H–FFH)
●
DMX STATUS (DMX port status)
●
INPUT: The port will be used as an input.
●
OUTPUT: The port will be used as an output.
●
DISABLE: The port will be disabled.
●
DMX MODE (Depends on whether the port is set as an input or output.)
●
If the port is set as input:
●
NORMAL: The DMX port receives the DMX signal and sends it to the first selected ArtNet
universe.
●
BACKUP: In case of a failure, or when there are no DMX values on the first selected ArtNet
universe for more than 3 seconds, the Net-8/5 starts sending the DMX values from the
backup port.
●
If the port is set as output:
●
SINGLE: The DMX signal is sent to the DMX port from the first selected ArtNet universe.
●
HTP: The DMX signal is sent to the DMX port from the merging of the 1
st
and 2
nd
ArtNet
selected universes. It will compare the values on the inputs and will send the highest value to
the DMX port for each DMX channel in both universes.
●
LTP: The DMX signal is sent to the DMX port from the merging of the 1
st
and 2
nd
ArtNet
selected universe. It will compare the values on the inputs and will send the last changed
value to the DMX port for each DMX channel in both universes.
●
PROTOCOL: Choose ArtNet, KlingNet or sACN.
●
FRAMERTE/FS: Set the DMX frames per second which will be sent. Choose from: 10, 15, 20, 25, 30, 35 or
40 frames per second.
●
PIXEL TYPE: Set the desired pixel type (RGB, RGBAW, RGBD, RGBA, RGBW). This option is visible only
when protocol is set to KlingNet.
●
PIXEL WIDTH: Set the pixel width, when using KlingNet (0–170). This option is visible only when protocol
is set to KlingNet.
●
PIXEL HEIGHT: Set the pixel height, when using KlingNet (0–170). This option is visible only when
protocol is set to KlingNet.
●
NETWORK: Set your network (0–127).
●
PRIMARY: Set the 1
st
ArtNet universe dedicated to this port (0–255).
●
SECONDARY: Set the 2
nd
ArtNet universe dedicated to this port (0–255). This option is visible only when
the port is set as output, the DMX mode is set to HTP or LTP and the protocol is sACN or ArtNet.
●
RESEND: The merged signal from the 1
st
and 2
nd
ArtNet universe keeps sending data, if there is no
activity. Choose which Artnet universe (0–255 and DISABLED) the data needs to be sent to. This option
is visible only when the port is set as output, the DMX mode is set to HTP or LTP and the protocol is
sACN or ArtNet.
06)
Press the RIGHT button to select the desired option.
07)
Press the UP/DOWN buttons to change the values.
08)
Press the RIGHT button to confirm.
09)
Press the LEFT button to go to the previous submenu.
10)
Press the LEFT button again to return to the main menu.
Содержание Net-8/5
Страница 21: ...20 Order code 50810 Net 8 5 Dimensions...
Страница 22: ...21 Order code 50810 Net 8 5 Notes...
Страница 23: ...22 Order code 50810 Net 8 5...
Страница 24: ...2019 Showtec...
