SHOWTEC NanoQ 12 Q4 V1, Руководство пользователя

Страница: 16 / 28

Ordercode: 43710
NanoQ 12 Q4
5. DMX-512 mode
With this menu you can adjust the device’s DMX settings.
01)
Press the MODE button until the display shows .
02) Press the SETUP button to open the menu.
03) Press the UP/DOWN buttons to set the device’s DMX starting address. The adjustment range is
between
.
04) Press the SETUP button to proceed to DMX channel mode settings.
05) Press the UP/DOWN buttons to choose one of the 3 DMX channel modes:
.
6. Master/Slave mode
With this menu you can set the device as a slave.
01)
Press the MODE button until the display shows .
02) The device is now set as a slave and will react the same as the master device.
7. Settings
With this menu you can adjust the device’s settings.
01)
Press the MODE button until the display shows .
02) Press the SETUP button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 3 options:
Display settings
Reset settings
Dimming curves
Dimming mode
7.1. Display settings
01)
When the display shows , press the SETUP button to open the submenu.
02) Press the UP/DOWN buttons to toggle between the following 5 options:
•
ON
•
05 seconds
• 10 seconds
•
20 seconds
• 30 seconds
03) This menu determines the time after which the display will turn OFF, if no button is pressed.
7.2. Reset settings
01)
When the display shows , press the SETUP button to open the submenu. The display will show
.
02) Press the SETUP button (to reset the settings) or the MODE button (to return to the main menu).
15