SHOWTEC NanoQ 12 Q4 V1, Руководство пользователя

Страница: 14 / 28

Ordercode: 43710
NanoQ 12 Q4
Main Menu Options
Auto run mode
Built-in programs
Manual mode
Sound-controlled mode
DMX-512 mode
Master/Slave mode
Settings
System information
1. Auto run mode
With this menu you can activate the auto run program.
01)
Press the MODE button until the display shows .
02) The device will now run all the built-in programs in a sequence.
2. Built-in programs
With this menu you can you can set the built-in programs.
01)
Press the MODE button until the display shows .
02) Press the SETUP button to open the menu.
03) Press the UP/DOWN buttons to select one of the 10 built-in programs: .
04) When the display shows , press the SETUP button to open the submenu.
05) Press the UP/DOWN buttons to choose one of the following 35 color presets:
06) Press the SETUP button again, to proceed to strobe flash frequency settings.
07) Press the UP/DOWN buttons to increase/decrease the strobe flash frequency. The adjustment range
is between
, from OFF to high frequency.
13