SHOWTEC NanoQ 12 Q4 V1, Руководство пользователя

Страница: 10 / 28

Ordercode: 43710
NanoQ 12 Q4
Multiple NanoQ 12 Q4s (DMX Control)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) Use a 3-pin/5-pin XLR cable to connect the NanoQ 12 Q4 and other devices.
05) Link the units as shown in (fig.04). Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
06) Supply electric power: Plug electric mains power cords into each unit's Pro power connector socket,
then plug the other end of the mains power cord into proper electric power supply sockets, starting
with the first unit. Do not supply power before the whole system is set up and connected properly.
Multiple NanoQ 12 Q4s (DMX Set Up)
Fig. 04
9