SHOWTEC Genesis Scan CDM-150, Руководство по эксплуатации продукта

Страница: 15 / 21

13
Addressing
With this menu you can set the DMX address or address a fixture as a master/slave.
- DMX addressing
1) Press , until the display shows .
2) Press to confirm, the display will show (with actually stored address).
And press
and to select the required address , press to confirm.
3) Press , the chosen address is shown on the display.
Operating options
These options allow you to modify the Genesis Scan’s operating behavior.
Press
to select the desired option, Press to cancel the desired option and press to set the value.
To return to the menu, press .
Please refer to chapter “ DMX Protocol” for a detailed description.
– No function
– No function
- Reset function
This option enables the Genesis Scan to index all effects (function) and return to their standard positions.
Press
, until the display shows or .
If the display shows (with actually stored address). Press , the display shows .
Press to run a reset. The option enables the Genesis Scan to index all effects (functions) and return to
their standard positions, the display shows , ( with actually stored address ). If you want address
no reset, don’t select .
- Music trigger
The Genesis Scan enables the sound control of the running programs via the built-in microphone. Press
, until the display show s or .
If the display shows (with actually stored address). Press , the display shows .
Press to music trigger. The display shows , (with actually stored address ). If you want address no
music trigger, don’t select .