SHOWTEC eventbar 12/3, Руководство пользователя

Страница: 13 / 32

12
Ordercode: 44110
EventBAR 12/3
Multiple EventBARs (DMX512 Mode)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) Use a 3-p XLR cable to connect the EventBAR and other devices.
05)
Link the units as shown in Fig. 05, Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second and third units.
06) Supply electric power: Plug electric mains power cords into each unit's PowerCON True 1 then plug
the other end of the mains power cord into proper electric power supply sockets, starting with the
first unit. Do not supply power before the whole system is set up and connected properly.
Multiple EventBARs DMX Set Up
Fig. 05
Note: Link all cables before connecting electric power!