SHOWTEC eventbar 12/3, Руководство пользователя

Страница: 21 / 32

20
Ordercode: 44110
EventBAR 12/3
6. Auto Run Program
With this menu you can set the Auto run mode of the EventBAR 12/3.
01)
Press the MODE button on the device, until the display shows .
02) The EventBAR will automatically start with its built-in program.
7. Built-in Programs
With this menu you can choose a built-in program.
01)
Press the MODE button on the device, until the display shows .
02) You can choose 9 built-in programs , by pressing the UP and DOWN buttons.
03) If you choose and you press SETUP you can choose between 9 programs and Off with the UP
and DOWN buttons.
04)
Press SETUP again and you can set the strobe value by pressing the UP and DOWN buttons.
05) Press the MODE button to go back to .
06) With the UP and DOWN buttons you can choose between .
07) Press the SETUP button to set the speed or strobe value.
08)
Press the UP and DOWN buttons to set the speed and strobe value between 0-99 or SPFL .