SHOWTEC 51347, Руководство пользователя, Страница: 29 / 44

28
Galactic RGB-6-750
Product code: 51347
Maximum Laser Output Adjustment
If you have opened menu, you can set the maximum laser output: Red, Green and Blue. This is
not a calibration menu. You can set the laser output only by color and not per aperture.
Press the ENTER button to select the desired laser:
Red laser, maximum output adjustment
Green laser, maximum output adjustment
Blue laser, maximum output adjustment
Press the UP/DOWN buttons to adjust the maximum output of the selected laser.
Press and hold down the ENTER button for 2 seconds to save changes. The device will start-up.
Note:
● While pressing the UP/DOWN buttons in order to set the maximum laser output, you will notice
different values. For example, the adjustment range for the red laser is .
Due to the limitations of the 3-digit display, not all values can be displayed.
The exact range is r00 to r99 (0–99) and then from rA0 to rP5 (100–255). Those are 255 steps, from off
to maximum output. See the table below for the entire range:
100–109 110–119 120–129 130–139 … 230–239 240–249 250–255
ra0 rb0 rc0 rd0 … rn0 ro0 rp0
ra1 rb1 rc1 rd1 … rn1 ro1 rp1
ra2 rb2 rc2 rd2 … rn2 ro2 rp2
ra3 rb3 rc3 rd3 … rn3 ro3 rp3
ra4 rb4 rc4 rd4 … rn4 ro4 rp4
ra5 rb5 rc5 rd5 … rn5 ro5 rp5
ra6 rb6 rc6 rd6 … rn6 ro6
ra7 rb7 rc7 rd7 … rn7 ro7
ra8 rb8 rc8 rd8 … rn8 ro8
ra9 rb9 rc9 rd9 … rn9 ro9