SHOWTEC 51347, Руководство пользователя, Страница: 28 / 44

27
Galactic RGB-6-750
Product code: 51347
05) Press the MENU button to toggle through the following options:
Red laser, minimum output calibration
Green laser, minimum output calibration
Blue laser, minimum output calibration
Red/Green/Blue laser, maximum output adjustment
06) Press the ENTER button to open the desired menu.
Minimum Laser Output Calibration
If you have opened , or menu, you can set the individual minimum laser
output (per aperture: 1–6; and per laser: Red, Green and Blue).
Press the ENTER button to select the desired laser aperture (1–6).
Press the UP/DOWN buttons to adjust the minimum output of the selected laser aperture.
Press and hold down the ENTER button for 2 seconds to save changes. The device will start-up.
Examples:
● If the display shows , press the UP/DOWN buttons to set the minimum output of the green
laser (5
th
laser aperture).
● If the display shows , press the UP/DOWN buttons to set the minimum output of the blue laser
(3
rd
laser aperture).
Note:
● While pressing the UP/DOWN buttons in order to set the minimum laser output, you will notice
different values. For example, the adjustment range for the red laser in the 2
nd
laser aperture is
. Due to the limitations of the 3-digit display, not all values can be
displayed.
The exact range is from r2
00 0 to r2 00 9 through r2 01 0 to r2 01 9, up to r2 25 5. Those are 255 steps, from
off to maximum output. The digits in red are not shown on the display, only the digits in black are.
See the table below for the entire range:
Display Values
r20–29 0–9
r20–29 10–19
r20–29 20–29
r20–29 30–39
… …
r20–29 230–239
r20–29 240–249
r20–25 250–255
●
Calibrate your device in a dark area, otherwise you will not be able to see the ultimate minimal
value.
● Set the specific minimal value, where you are no longer able to see even the faintest laser dot on the
wall.