SHOWTEC 51347 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 44

SHOWTEC 51347 Скачать руководство пользователя страница 22

21

Galactic RGB-6-750

Product code: 51347

Control Panel

A)

3-digit LED display

B)

ENTER button

C)

DOWN button

D)

UP button

E)

MENU button

Fig. 13

●

Use the MENU button to exit the current submenu, to return to the main menu and to navigate
through the main menu.

●

Use the UP/DOWN buttons to navigate through the menus or to increase/decrease numeric values.

●

Use the ENTER button to open the desired menu, to confirm your choice or to set the currently
selected value.

Starting the Device

01)

Make sure that all laser safety measures are in place and working. See 2.3. Laser Safety on page 9 for
more information.

02)

Connect all data cables, if applicable. See 5.3. DMX Connection on pages 17–19 for more
information.

03)

Connect the remote interlock (or emergency switch) to the remote interlock connector (10). See 2.4.
Safety Devices on page 9 for more information. For programming purposes you may use the supplied
test connector.

Note:

●

If the test connector is not inserted into the remote interlock connector, you cannot operate the
device. The device will power up, but it will not produce a laser beam.

●

The remote interlock is not supplied. You can purchase a remote interlock from your Highlite
International dealer. Check your local regulations, as in some countries it is not allowed to operate
the device without a remote interlock.

04)

Connect the device to the socket-outlet with the power plug. See. 4.5. Connecting to Power Supply
on page 15 for more information. The display shows a splash screen with the current version of the
firmware:

05)

Insert the key into the key switch (11). The device is now operational. Turn the key switch (11) to ON
position to turn on the laser beam. See 2.4. Safety Devices on page 9 for more information.

«
...
20
21
22
23
24
...
»

Содержание 51347













































Отзывы:

Нет отзывов