SHOWTEC 51347 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 44

SHOWTEC 51347 Скачать руководство пользователя страница 21

20

Galactic RGB-6-750

Product code: 51347

6.

Operation

Safety Instructions for Operation

WARNING
Laser radiation
Avoid exposure to beam.

This device is a class 3B laser device according to the classification in NEN-EN-IEC 60825-1:2014. The
device can be operated only by instructed or skilled persons.

●

Check all applicable national and international regulations concerning laser safety before operating
this device.

Attention
This device must be used only for the purposes it is designed for.

This device is intended for professional use as a laser projector to produce laser displays or show effects. It
is suitable only for indoor installation. This device is not suitable for households.

Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.

Attention
Power supply

Before connecting the device to the power supply, make sure that the current, voltage and frequency
match the input voltage, current and frequency specified on the information label on the device.

Control Modes

The Galactic RGB-6-750 supports the following control modes:
●

Stand-alone:

Auto mode (built-in shows), color mode

●

Master/Slave:

Auto mode (built-in shows), color mode

●

DMX-512:

7, 9, 12, 36, 48, 54, 66 channels

«
...
19
20
21
22
23
...
»

Содержание 51347













































Отзывы:

Нет отзывов