SHOWTEC 51347, Руководство пользователя, Страница: 26 / 44

25
Galactic RGB-6-750
Product code: 51347
Corrective Menu Options
Factory Reset
In this menu it is possible to restore the default factory settings. Make sure that the device is off before
performing the following steps.
Press and hold down the MENU and UP buttons.
While holding the buttons down, connect the device to the socket-outlet with the power plug. See.
4.5. Connecting to Power Supply on page 15 for more information. The display shows a splash screen
with the current version of the firmware:
03) The display will blink and the default factory settings will be restored.
Beam Direction
In this menu it is possible to manually set the individual laser beam directions. Make sure that the device is
off before performing the following steps.
Insert the key into the key switch (11). The device is now operational. Turn the key switch (11) to ON
position to turn on the laser beam. See 2.4. Safety Devices on page 9 for more information.
Press and hold down the DOWN and ENTER buttons.
While holding the buttons down, connect the device to the socket-outlet with the power plug. See.
4.5. Connecting to Power Supply on page 15 for more information. The display shows a splash screen
with the current version of the firmware:
04) A new menu will appear:
05)
Press the MENU or ENTER button to select the desired laser aperture (1–6). The currently selected laser
aperture will light in red.
06) Press the UP/DOWN buttons to adjust the beam direction.
07) Press and hold down the ENTER button for 2 seconds to save changes. The device will start up.
Examples:
● If the display shows , press the UP/DOWN buttons to set the vertical position of the 2
nd
laser
aperture.
● If the display shows , press the UP/DOWN buttons to set the horizontal position of the 6
th
laser
aperture.