Installation & User’s Manual
SL PAR 155 ZOOM RGBW LED Luminaire
1 0
INSTALLATION AND SET UP
Sh wline
3. Connecting to the DMX512 Network
Basic DMX512 installation consists of connecting multiple SL PAR 155 ZOOM RGBW LED Luminaires together
(up to 32 luminaires) in "daisy-chain" fashion. A cable runs from the control console (or DMX512 control source) to
the DMX connector on the first SL PAR 155 ZOOM RGBW LED Luminaire. Another cable runs from the other
DMX connector on the first unit to a DMX connector on the next SL PAR 155 ZOOM RGBW LED Luminaire (or
DMX512 device to be controlled).
Figure 5: SL PAR 155 ZOOM RGBW LED Luminaire DMX512 Input / Output Connections
Note:
For more information on DMX512 networking and systems, refer to
"Additional Resources for DMX512" on
page 1
. For SL PAR 155 ZOOM RGBW LED Luminaire DMX Mapping, refer to
"DMX CONTROL" on page 24
.
Figure 6: SL PAR 155 ZOOM RGBW LED Luminaire - DMX512 Connections
DMX512 / RDM
Luminaire
Input Connector
DMX512 / RDM
Output Connector
Rear of Unit
DMX512
(out to the next luminaire or
DMX512 controlled device)
DMX512
DMX512
(out from first
to second luminaire)
DMX512 Connections
Note: Remaining pins on each connector are not used.
DMX512 Signal
XLR Pin
Common (Drain)
1
DMX512 -
2
3
(from console or
control device)