by the plug. N ever pull out the plug by tugging the pow er-cord.
The electric connection, repairs and servicing m ust be carried out by a qualified
D o not connect this device to a dim m er pack.
D o not sw itch the fixture on and off in short intervals as this w ould reduce the lam p s
D uring the initial start-up som e sm oke or sm ell m ay arise.
does not necessarily m ean that the device is defective.
D o not touch the device s housing bare hands during its operation (housing becom es hot)!
For replacem ent use lam ps and fuses of sam e type and rating only.
A void looking directly into the light source(m eant especially for epileptics) !
This device is a m oving-head spot for creating decorative effects and w as designed for
If the device has been exposed to drastic tem perature fluctuation (e.g.
ation), do not sw itch it on im m ediately.
The arising condensation w ater m ight dam age
Leave the device sw itched off until it has reached room tem perature.
N ever run the device w ithout lam p!
Avoid brute force w hen installing or operating the device.
N ever lift the fixture by holding it at the projector-head,
dam aged.A lw ays hold thefixture at the transport handles.
W hen choosing the installation-spot,
please m ake sure that the device is not exposed to
m oistureor dust.There should not be any cables lying around.You
endanger your ow n and the safety of others!
The m inim um distance betw een light-output and the illum inated surface m ust be m ore
M ake sure that the area below the installation place is blocked w hen rigging, derigging
or servicing the fixture.A lw ays fix the fixture w ith an appropriate safety-rope.
O nly operate the fixture after having checked that the housing is firm ly closed and all
The lam p m ust never be ignited if the objective-lens or any housing-cover is open,
discharge lam ps m ayexplose and em it a high ultraviolet radiation, w hich m ay cause
The m axim um am bient tem perature ta = 40
lam p is sw itched off andthe fixture is out of operation for 5 m inutes..
