![background image](http://html.mh-extra.com/html/adorama/flashpoint-monolight-fp1220a/flashpoint-monolight-fp1220a_quick-start-manual_2853395001.webp)
Safety Precautions:
1.
Before using the light, make sure that the electrical outlet of your local power supplier matches the power regulation
indicated on your lighting equipment.
2.
Do not use any power supply other than the AC specification indicated on your equipment.
3.
Do not expose your lighting equipment to sunshine, moisture, dust, dirt, rain, or water.
4.
Any exposure to chemical solutions, gasoline, grease, oil, paint, or detergents can result in permanent damage to your equipment.
5.
Do not insert metal parts into any lighting equipment.
6.
Dry your hands before handling the equipment, as touching your equipment with wet hands is dangerous to both the equipment and to
you.
7.
Do not keep the power on when the light is not in use.
8.
Do not attempt repairs to your lighting equipment personally. If a problem arises, contact the store from which you purchased the light.
9.
If the beeper buzzs for a long time or there is no response from your flash,please turn off the strobe and restart it again.
10.
This flash has an overfrequency protection circuit,rapid continuous firing of your flash will cause an audible alert.continued rapid firing
after audible alert will cause the flash to cease operation and trigger a “cool down” period of approximately of 10 seconds.after this
period,the flash will resume operation.you may also reboot the flash by cycling the power off and then on.
Specifications:
Model
FP1220A
FP1220A
FP1820A
FP2420A
Power Supply
AC100
−
130volt 60Hz
AC100
−
130volt 60Hz
AC100
−
130volt 60Hz
AC100
−
130volt 60Hz
Strobe output
600WS
600WS
900WS
1200WS
Guide No. (ISO100)
76m
76m
90m
115m
Cooling Fan
Built-in Mini Fan Cooler
Built-in Mini Fan Cooler
Built-in Mini Fan Cooler
Built-in Mini Fan Cooler
Power Setting
1/16 to 1/1 continuously
1/16 to 1/1 continuously
1/16 to 1/1 continuously
1/16 to 1/1 continuously
Recycle Time
<5s
<5s
<6.5s
<6.5s
Flash Duration
1/1500–1/800s
1/1500–1/800s
1/1500–1/800s
1/1500–1/800s
Recycle Indication
Ready Light & Audio Signal & Modeling Lamp
Ready Light & Audio Signal & Modeling Lamp
Ready Light & Audio Signal & Modeling Lamp
Ready Light & Audio Signal & Modeling Lamp
Flash Beam Width
Over 55 Degree
Over 55 Degree
Over 55 Degree
Over 55 Degree
Slave Sensitivity
Over 33ft. Radius,360 Degree
Over 33ft. Radius,360 Degree
Over 33ft. Radius,360 Degree
Over 33ft. Radius,360 Degree
Modeling Lamp Output
Halogen E27/250W
Halogen E27/250W
Halogen E27/250W
Halogen E27/250W
Color Temperature
5600K
5600K
5600K
5600K
Synch Cord Voltage
6V DC
6V DC
6V DC
6V DC
Triggering
Synch Cord & Test Button & Slave Senor & Radio Trigger
Synch Cord & Test Button & Slave Senor & Radio Trigger
Synch Cord & Test Button & Slave Senor & Radio Trigger
Synch Cord & Test Button & Slave Senor & Radio Trigger
Fuse
10A
10A
10A
10A
Housing Size
136
×
127
×
300mm
136
×
127
×
300mm
136
×
127
×
400mm
136
×
127
×
400mm
Body Weight
2.4kg
3.2kg
3.4kg
Light Body &
Rearward
Control Panel
(1) Socket: AC Power Supply
(2) Safety Fuse
(3) Socket: Synch Cord
(4) On/off switch: general power supply
(5) On/off switch: modeling Lamp
(6) On/off switch for Beeper
(11) Locking/Releasing Bolt for Reflector& Soft Box Connector (16) Stand Mounting Bolt
(7) Recharge Ready-Light
(12) Test Button
(17) Umbrella Holder
(8) Slave Sensor
(13) Output Power Setting: flash/ modeling lamp
(18) Modeling Lamp
(9) Handle Grip
(14) Handle for Angle Adjustable
(19) Replaceable Flash Tube
(10) On/off switch for sensor
(15) Stand Mounting
MONOLIGHT
1220A/1820A/2420A
-1-