Showco Spot 575, Инструкция по эксплуатации

Страница: 6 / 22

5.Installion
To insert the lam p M SR 575/2 95V /575W G X -9,5 loosen the lam p cover at the rear of
head (see the draw ings ) byrem ow ing the 3 fastening screw s w hich are m arked "X ,Y,Z".
C arefully pull out the cover w ith the lam p socketassem bly.If changing the lam p, rem ove
the old lam p from the socket. Insert the lam p to the socket.
D o not install a lam p w ith a higher w attage! A lam p like this generates tem peratures the
device is not de-signed for.D am ages caused by non-observance are not subject to w arranty.
Please follow the lam p m anufacturer notes!D o not touch the glass-bulb w ith bare hands
during the installation! M ake sure that thelam p is installed tightly into the lam pholder
system .
R eclose the lam p cover and tighten the 3 screw s.
.Lam p assem bly:
5.1 Fitting the lam p
3 phillips screw s "X,Y,Z"
Lam p cover
D o not operate this fixture w ith opened housing-cover!
3 adjustm ent screw s "A,B,C "
5.2 L am p adjust
The SPOT 575 lam pholder is aligned at
the factory. D ue to differences betw een
lam ps , fine adjustm ent m ay im prove light
perform ance.Strike the lam p,open the shutter
and the iris,set the dim m er intensity onto
100% and focus the light on a flatsurface
(w all).C enter a hot-spot(the brightest part of
the im age) by using the 3 adjustm ent screw s
"A ,B ,C ".Turnone screw after another a
quarter-turn clokw ise(counter-clokw ise. If
you cannot detect the hot-spot,adjust the
lam p until the light is evenly distributed.
R em ove the screw s X ,Y and Z for re-lam ping
W A R N IN G !
D isconnect the fixture from A C pow er before re-lam ping.
Lam p is hot! R isk of fire! P rotect hands and eyes.
W ait at least 15m in.B efore opening the covers
and rem oving lam p from the fixture.
M axim um room tem perature t=40
M inim um distance from flam m able m ateriald=0.5m .
E xteriorsurface tem perature T=80 .
N otfordom estic use.
X
Z
A
B
A djust lam p position by turning screw s A , B and C
R em ove the screw s X ,Y and Z for re-lam ping
W A R N IN G !
D isconnect the fixture from A C pow er before re-lam ping.
Lam p is hot! R isk of fire! P rotect hands and eyes.
W ait at least 15m in.B efore opening the covers
and rem oving lam p from the fixture.
M axim um room tem perature t=40
M inim um distance from flam m able m ateriald=0.5m .
E xteriorsurface tem perature T=80 .
N otfordom estic use.
X
Z
A
B
A djust lam p position by turning screw s A , B and C
4
www.carlosmendoza.com.mx