- 5 -
4.
Operation
4-1
Battery
AccStick has a rechargeable battery of lithium polymer that can be charged via a specific
harness and micro USB cable connected to a PC. An Orange LED light appears when
charging, and disappears when full charged (see Fig.1). The time it takes to full charge is
around 60 min from empty. Also, this unit can operate continuously up to 3 days when the
acceleration trigger is selected. This time range varies depending on the temperature,
measuring condition etc.
Note1: After measuring, turn off the main power to prevent any issues with over charging of
battery.
Note2:
Measurements should be made during the span of time in which the battery retains its
charge. In the event of the battery voltage falling below the pre-set range during measurements, all
data will be lost.
Note3: Pin type of connector of harness is a difference betw een AccStick and relay module.
Please note its direction when connect. (see Fig.2) Do not connect this harness with wrong
direction since harness may be broken.
Note4: Rechargeable battery will be available until about 500 times charge.
Fig.1 Condition of Battery Charging
