- 14 -
＜
Starting Operation
＞
Start Date
：
Configuration item for when Timer or Timer&Acc trigger mode is selected.
Measuring will started at the time you selected. You do not need to configure
this in Immediately or Acc. mode.
START
：
Measuring will begin after clicking, at the time as appeared on the PC. When
“Timer”
or “Timer&Acc.” modes are selected, the unit will start to measure at your selected
time automatically after click “START”.
STOP
：
Measuring will be stopped after clicking, and the time on the PC will appeared.
＜
Record Data
＞
Trig. Data
：
Measured acceleration data is shown.
・
At Immediately or Timer mode, trig data is shown as 1.
・
At Acc. or Timer&Acc. mode, trig. data shows the number of measured data of
each frame you selected.
Start Date
：
Date & time of download shows here.
Acc.
（
G
）
：
Selected acceleration range is shown.
Sampling(ms)
：
Selected sampling rate is shown.
Frame
：
Selected frame is shown.
Folder
：
Stored folder for data download is selected as you require.
Download
：
Start data download from AccStick. Data will be appeared on the screen and
converted csv file in the selected folder.
