- 9 -
6.
Measuring protocol
6-1
Configuring measuring conditions
Click the “USB com” on the PC software after making sure the Baud (bps) is
configured as 230400. After that, the icon color changes to blue if success.
※
please confirm below if connection is not successfully.
・
USB cable is disconnected and re-insert it to the PC.
・
Confirm if the Baud(bps) is 230400.
・
Check the connection between the USB cable, module harness and AccStick.
・
Install the specific USB driver to your PC
Connect AccStick to PC with the cable module like the
picture on the right. Charge the battery if necessary.
USB ライセンスキーを PC に接続
C
lick “Time ADJ” to align the time on your PC to the AccStick timer. The icon’s
color will change to blue if successful.
＜
Basic setting
＞
Click “Register” after selecting all the parameters. The icon color changes to blue if
successful. Each parameter is shown on P.13.
※Note
Do NOT turn off the main battery when AccStick is communicating with the PC.
Complete setup of AccStick
