Shinybow USA SB-3403, Инструкция по эксплуатации

Страница: 53 / 56

51
GALIGN PC TOOL
6. [Write]: Click the [Write] button. The user should see the result on TV1. If [Real Time] is activated, the [Write] function will be
disabled. If the coordinates value are beyond the limits of the system, the user may see some unstable images or grid lines on the
screen. Once the user corrects the value, it will normalize.
7. Follow the same procedures to key-in the coordinates for TV2-TV4. Then click the
[Write] button to see the results.
8. [Shift Mode]: If the position of the image is still not accurate, the user can use the [Shift Mode] to adjust the H&V location without
changing the image size and angle. Users can also use the [F1] key on the remote control to execute the same [Shift] function.
9. [Real Time]: Users can also click the [Real Time] button to enable real time image position adjustment. When the user clicks the
slide bar in each coordinate, the user will see the image change in real time. After finishing fine-tuning the position, please disable
[Real Time] and click the [Write] button again to save your final result. Please note if the PC processing power is not enough, the user
will see some image lag during real time adjustment.
10.
[Warp Ratio] is to adjust the aspect ratio (image width and height) for the complete image in horizontal and vertical directions.
11. [Warp Position] is to adjust the complete image position in the video wall in horizontal and vertical directions. No position can be
shifted before the user adjusts the [Warp Ratio] .
12. [Profile] is to save all settings on the SB-3403 including the input source, PiP/PoP, video wall settings, ratio, looping playback,
color... Please select the Profile # and click [Save] to store the setting and click [Load] to recall it at any time. A maximum of up to (5)
profiles can be saved. Don’t forget to press [Write] before saving the settings to [Profile] .
13. [Loop Range] is to select the Index quantity for looping playback. Please put the Index for playback at the front. Users can only
set the quantity for the playback starting from the 1st Index.
14.
[Loop Time] is to set the time interval for looping playback for each Index. If the user includes (2) of the same Index #s, it means
the content in this Index # will be displayed with double time intervals. It will increase the flexibility for the display time settings in a
different Index.
15.
[Read] is to read back the current setting on the SB-3403 and do further modifications or [Write] to another Index. It is convenient
to create a different loop playback Index for LCD protection or flexible of display.
If the user wants to copy one setting from the Index #1 to Index #2, here is the procedure:
a. Click [Index #1]
b. [Read] the Index. Users will see the change of the video wall based on this Index.
c. Select [Index #2] , click [Write] to save this settings into [Index #2] .
16. [Save Setting]: Users can save the settings to the PC through the [Save Setting] and load the settings from a PC or copy to other
units through [Load Setting] .
17. [Reset] is to reset the settings in the current Index to the default value.