Shinybow USA SB-3403, Инструкция по эксплуатации

Страница: 26 / 56

24
MULTIPLE UNITS CASCADED
4K2K 8X TV IRREGULAR VIDEO WALL:
a. Select the preset display mode: Mode 126/134
b. Connect the same signal to all of the SB-3403’s.
c. Video wall settings on the SB-3403:
Items Zone A Zone B
Zoom H=2, V=1 H=2, V=1
Pan H=1, V=1 H=2, V=1
Overlap RH Edge LH Edge
Overlap pixels for the Zone A (Display Unit A) & B (Display Unit B) should be the same. Users can open the [Overlap] menu and select
the [RH Edge] for A & [LH Edge] for B, then increase the [Overlap] value gradually in both the [Display Unit A] & [Display Unit B] to
see (2) images from both of the SB-3403’s coming closer until the image edges meet together.
d. During [Overlap] adjustment, the image may have a frame tear. It will disappear after powering the unit ON again.
e. Save the final settings to the OSD [Options]→[Settings]→[Profile]→[Save]→[Index 1-5] . Users can recall it at any time.
NOTE:
1. During the [Overlap] adjustment, the image may have frame tear because the parameters are just temporarily stored in the system.
Once the system has been powered OFF/ON again, the settings will be stored into the system and frame tear phenomenon will disappear
permanently and will not happen again.
2. Please enable the
[Frame Lock] function under the [Options]→[Setting] menu to make sure all the SB-3403’s will synchronize with
the signal without frame tear or image lag. Default is [Enable] .