Shinybow USA SB-3403, Инструкция по эксплуатации

Страница: 31 / 56

29
SETTINGS
SIZE:
(Only applies to the PiP function)
• The size of the PiP image can be adjusted though the [Size] OSD menu pixel by pixel.
• The maximum size of the PiP image is 1024x768 pixels.
POSITION:
(Only applies to the PiP function)
• The position of the PiP image can be adjusted through the Position OSD menu.
• The PiP image will be maintained inside the main image and can’t be outside the main image.
• Pixel by Pixel PiP image position adjustment can be implemented by continuously Horizontal and Vertical position adjustments.
RATIO:
Aspect Ratio of the display image. (Only applies to PiP function)
• Full Screen : Same aspect ratio as the main image.
• Original AR : Same aspect ratio as the PiP input source.
• PoP image aspect ratio can be adjusted through the [Scaling] under the [Image Properties] OSD menu.
• Source: Users can select the input source for the PiP/PoP image from all the input ports. By selecting different input ports
for the Main & PiP/PoP images, users can have different combinations of displays. Users can save different settings into the
[Profile] under the [Option] menu and recall it at any time.
IMAGE ORIENTATION:
This image orientation function will be applied to the entire display units (4 LCD’s).
Major Purpose:
• To create more Display Modes based on the Pre-defined Display Modes.
• To enhance and get more flexibility in multiple SB-3403’s cascaded
applications.
• Display Mode #5 is preset on the SB-3403.
• When users rotate the image 90°, a new display mode #05A can be achieved on the SB-3403.
• (4) SB-3403’s with Mode #5 with 90° rotation, user can get 4x4 video wall display.
• (4) SB-3403’s with Mode #1, can also get 4x4 video wall without image rotation.
After 90°
rotation
Display Mode
#05A
Original preset Display Mode #05