![background image](http://html.mh-extra.com/html/shinola/detroit/detroit_manual_1258280018.webp)
34
35
AUTOMATIC MODEL SW260-1
If your timepiece features a screw-down crown, you must first unscrew the crown
before you adjust any settings. Refer to page 5 for crown functionality.
WINDING WHILE STOPPED
The maximum power reserve can be restored by
turning the crown clockwise around 30 times.
SETTING THE DATE (QUICK MODE)
For screw-down crown, unscrew the crown to release
it into first position.
Pull out the crown to position II (watch still running).
Turn the crown clockwise until the required
date appears.
Push the crown back into position I.
If setting the date between 9:00 p.m. and 3:00 a.m.,
follow steps 1 through 3, but be sure to set the date
to the following day.
Remember to reseal the crown if it is a screw down.
To do so, press it against the case until the threads
engage. Then turn it clockwise until tight.
SETTING THE TIME
For screw-down crown, unscrew the crown to
release it into first position.
Pull out the crown to position III (the watch stopped).
Turn the crown until the current time is shown
(remember the 24-hour cycle).
Push the crown back into position I.
Remember to reseal the crown if it is a screw down.
To do so, press it against the case until the threads engage.
Then turn it clockwise until tight.