24
25
*
ACCUMULATED TIMING
Example
1
Start: start timing.
2
Stop: e.g.,
15 min. 5 sec
. following
1
.
3
Restart: timing is resumed.
4
*Stop: e.g.,
13 min. 5 sec.
following
3
.
The accumulated time = 28 min. 10 sec.
5
Reset: The three chronograph hands
are returned to their zero positions.
Please note:
* Following
4
, the accumulation of the timing can be
continued by pressing push-button
A
(Restart/Stop, Restart/Stop,…)
INTERMEDIATE OR INTERVAL TIMING
Example
1
Start: start timing.
2
Display interval:
e.g.,
10 min. 10 sec.
following
1
.
Timing continues in the background.
3
Making up the measured time:
the three chronograph hands are quickly
advanced to the ongoing measured time.
4
Stop: e.g.,
10 min. 10 sec.
following
1
.
5
Reset: The three chronograph hands are
returned to their zero positions.
Please note:
* Following
3
, further intervals or intermediates can be
displayed by pressing
B
(display interval / make up measured time, …)
1
5
2
3
4
A
B
1
2
4
3
5
A
B
708
II III
I
3
1
2
708
708
708
II III
I
3
4
1
2
708
708
II
I
3
1
2
MOON PHASE MODEL 708
SETTING THE MOON PHASE
1
Pull out the crown to position
III
(the watch stops).
2
Turn the crown until you reach the correct moon position.
Be sure to match the position to accurate moon phase
(use a lunar calendar). The moon disc moves very slowly by
incrementally jumping every 24 hours (each date change).
3
As time function rotates on position
III
, the hands
will move while setting moon phase. Once accurate
moon phase is achieved, set the hour and minute
hands back to the correct time.
4
Be sure to reset the date indicator to correct date
(refer to SETTING THE DATE instructions above).
SETTING THE TIME
1
Pull out the crown to position
III
(the watch stops).
2
Turn the crown until you reach the correct time.
3
Push the crown back into position
I
.
SETTING THE DATE
1
Pull out the crown to position
II
(the watch continues to run).
2
Turn the crown until the correct date appears.
3
Push the crown back to position
I
.
4
Do not set the date between 9:30 p.m. and 12:00 a.m.
to ensure accuracy.