Shinko CHC-S9045, Руководство по эксплуатации

Страница: 9 / 49

SECTION 1. FOR SAFE MACHINE USAGE
1-4
Handling the Printer - Continued from previous page
NOTICE: The thermal head may get damaged if its surface is directly touched by
hand. The ingress of sand or other hard foreign matter may also damage
the thermal head, so do not handle under the situation that such can
happen.
WARNING: Connect the power plug properly.
WARNING: During operation, the thermal head becomes hot. This state,
however, is not abnormal. Since the thermal head becomes
very hot, be sure to keep hands away from this section.
WARNING: If it becomes necessary to repair the printer, limit the scope of
repair only to that described in this operating manual. If you
do not perform any repairs yourself, please contact your
product dealer or Shinko Electric's product maintenance
WARNING: Always use only the power cable accompanying this product.
If the product is used with its grounding pin (third pin) not
connected and current leakage occurs, fire or electrical shock is
most likely to result. The use of the product under such a
status could also cause signal-receiving interference to a radio,
a television receiver, and other similar electric appliances. If
the proper grounding connection is not possible, please consult
with your product dealer or Shinko Electric's product
maintenance service or sales representative.