Shinko CHC-S9045, Руководство по эксплуатации

Страница: 18 / 49

SECTION 2. INSTALLATION AND SETUP
2-7
４．
Set a new ink ribbon in the ink
ribbon cassette so that the
supply side of the ribbon (that is,
the side where the new ribbon is
wound) and the geared side face
in the directions shown in the
photo.
If the ribbon is not mounted
correctly, it cannot be set in the
printer.
Geared bobbin (White) Geared bobbin (Gray)
Supply side
５．
Remove any take-up slack of the ink
ribbon by rotating the white geared
bobbin.
NOTICE: If the ink ribbon has a slac
k, this may cause paper con-
gestion. Completely remove
the slack.
NOTICE: Set the ink ribbon so that the
collar of the white geared
bobbin faces the inside of the
ink ribbon cassette. If setting
the ribbon with the collar
facing the outside of the
cassette is attempted, the
ribbon cannot be set in the
printer.
Collar of the white geared