Shinko CHC-S9045, Руководство по эксплуатации

Страница: 16 / 49

SECTION 2. INSTALLATION AND SETUP
2-5
Functions of Each Section
Name of component Function
Paper storage unit
When the cover of this storage unit is open, it is
possible to replace the paper with new paper, or
in case of paper congestion, to remove any
fragments of the paper, or to conduct other
maintenance operations.
Lever
This lever opens the cover of the paper storage
unit. The cover can be opened by lifting the
lever.
Ribbon cassette cover Opening this cover allows ink ribbon changing.
Operations panel
An operating button and printer status indicator
lamps are arranged on this panel.
Power switch
This switch turns on and off the power to the
printer.
A press of the "|" section turns on the power, and
a press of the "o" section turns off the power.
Note: After turning power off, wait for at least
about three seconds before turning power
back on.
Power connector This connector is for connecting the power cable.
USB connector This connector is for connecting the USB cable.
Ink ribbon cassette This cassette is to accommodate an ink ribbon.
Paper flange assembly This flange assembly is for setting paper.
Trim Box
This box is for collecting a trim from each print.
Caution: Make sure to dispose the trim in this
box every time exchange the paper roll.
To many trim in this box can be a cause
of paper jam.
Ink ribbon identification
card insertion slot
This insertion slot is for setting the ink ribbon
identification card.