Shinko CHC-S9045, Руководство по эксплуатации

Страница: 22 / 49

SECTION 2. INSTALLATION AND SETUP
2-11
Setting Print Paper and the Ink Ribbon Identification Card
２．
Open the cover of the paper storage
unit on the front panel of the printer.
This can be performed by lifting the
lever located at the bottom of the
paper storage unit, and then pulling
the storage unit out toward you.
１．
First, collect paper into the paper
supply section of the printer as follows:
If the printer contains paper, press the
PAPER REWIND button on the
operations panel.
The paper will be collected automat-
ically.
(This operation is not required when
setting up the printer for operation.)
３．
Remove the
trim box.
NOTICE: After pulling out the paper
storage unit, do not push it from
top.
Otherwise, deformation
could result.In addition, do not
open the cover of the paper
storage unit together with the
ribbon cassette cover.
Caution
：
Make sure to dispose the trim
in this box every time exchange
the paper roll. To many trim in
this box can be a cause of paper
jam.