Shinko CHC-S9045, Руководство по эксплуатации

Страница: 42 / 49

SECTION 5. TROUBLESHOOTING
5-7
In Case of a Paper-Loading Failure
If a small deal of paper is set, it may not be loaded into the printer properly.
In this case, troubleshoot using the following procedure:
１．
Open the paper storage unit at the
front bottom of the printer by pulling
the storage unit out to the front while
lifting the lever at the bottom of the
unit.
２．
Cut off the leading end of the paper
using scissors.
That is, cut off the shaded sections
shown in the view at left.
３．
Remove the paper from the paper
flange assembly.