Shinko CHC-S9045, Руководство по эксплуатации

Страница: 36 / 49

SECTION 5. TROUBLESHOOTING
5-1
In Case of the Red LEDs Lighting
The appropriate red LEDs on the operations panel light (or blink) to indicate that some
trouble has occurred.
The types of trouble and the respective corrective actions are listed in the
table below.
In this table, the "on", "off", and blinking states of the LED are denoted as
●
,
○
, and
＊
, respectively.
LED indicators
PAPER RIBBON ERROR
Trouble Corrective action
● ○ ○
The printer has clogged with
paper.
Remove the clogging paper.
If the printer clogs frequently,
please consult with your
Shinko Electric product
service representative.
＊ ○ ○
The printer has run short of
paper or is not loaded with
paper.
In the former case, add paper.
In the latter case, load the
printer with paper.
○ ● ○
The wrong type of ink ribbon
is set.
Confirm the type of ink ribbon
and then set the correct type
of ink ribbon.
○ ＊ ○
The printer has run short of
ink ribbon or an ink ribbon
is not set.
Set an ink ribbon.
○ ○ ●
The movable section or
control circuit board of
the printer is abnormal.
Repairing is likely to be
required.
Please contact your Shinko
Electric product service
representative.
○ ○ ＊
The ribbon cassette cover or
the paper storage unit is
open.
lose the ribbon cassette cover
or the paper storage unit.
○ ● ●
The wrong type of ink
ribbon identification card
is inserted.
Confirm the inscription on the
surface of the ink ribbon
identification card and then
insert the correct card.
○ ＊ ＊
The ink ribbon identification
card has come short of
available space. Or the ink
ribbon identification card
itself is not inserted.
Insert the ink ribbon
identification card.
If the ink ribbon identification
card has come short of
available space, also replace
the ink ribbon and the paper.